Sports Nutrition - Training Advice (Menu Planning, Recovery Snacks, Fl Essay - 1

Sports Nutrition - Training Advice (Menu Planning, Recovery Snacks, Fluids, Supplements) - Essay Example Therefore, to ensure that the demands on the athlete's body are well met, it is essential to make a Menu Planning, not only based on what the athlete enjoys eating but also what the athlete is needing to accomplish the daily calorie intake (Coyle, 2004):36). In addition, the portion of each food component in the menu will change, based on the level of the training activity of the athlete, current weight, height and age of the athlete (Stouffer, 2002:7). Thus, for Pete, the following Balanced Menu Planning has been customized, based on bodily calorie intake needs and the training activity levels. The customized menu has been informed by the fact that under the Dietary Assessment and Hydration section in Part I, it was recommended that Pete should reduce both his protein and fat intakes, and increase his carbohydrates intake. The Recovery snacks are as important to the body of an athlete, just like the breakfast is considered to be the most important meal of the day (Burke & Deakin, 2010:17). During the marathon training activity, an athlete can break down both the muscle and the red blood cells, while also using all the stored up glycogen and also sweating up to two litres of water (Volpe, 2006:24). Therefore, what an athlete consumes after training is crucial both for the athlete’s performance and also recovery, while also supporting the immune system to handle anybody damages sustained during training (Manore & Thompson, 2010:33). The consumption of recovery snacks, therefore, is one way through which replenishing the muscles and restoring liver glycogen are attained, thus enabling the positive recovery and future performance. The consumption of recovery snacks also helps the athlete’s body to attain the necessary protein needed for tissue repair, as well as the restoration of fluids and electrolytes that are lost during sweating (Burke, 2007:12). Thus, the following is a Recovery Snack Menu customized for Pete.  Ã‚  

MegaCorp Surf Shoppe Assignment Example | Topics and Well Written Essays - 1250 words

MegaCorp Surf Shoppe - Assignment Example Organizational unit is a part of active directory that is used for its organizing and management. Under Microsoft’s documentation,the term â€Å"organizational unit† is interchangeably used with the term â€Å"container†.It is a further subdivision of an active directory into which can be placed users, different systems (computers) and other organizational units that are operational in megacorp. These organizational units can be used for mirroring the organization’s structuring i.e., megacorp forest’s working and its operational maintenance. In fact, every domain can independently organize, implement and maintain its own organizational unit hierarchy. If megacorporation incorporates several domains, it can conveneiently create organizational unit structures in each domain that stands idependent and self operational against the structures in other domains. (Wei Wei, Bing wang & Chun Zhang, 2004) 2. If Megacorp services intend to connect and yet stay separate from the Megacorp forest structure, this can be done through offline domain join, which is progressively used in Windows Server 2007 and Windows Server 2008. It can be used to join a domain without actually engaging or contacting the domain controller. This way, megacorp Forest structure would connect and yet emain separate (karen Coyle & diane Hillman, 2007). Megacorp might intend to deploy many virtual machines in the data centre. Offline domain join would make it possible for the virtual machines to be joinesd to the domain name when they nitially start after the installation of windows 2008. This would additionally save a huge amount of time that could be required for wide scale virtual machine deployments. This scenario of domain join creates an aunthenticity relationship and a trust between the active directory domain and the system running the windows 2008 operating system. Windows 2008 server also offers a mechanism that can be used by negacorp services to connect a nd yet maintain their separate identity. Under this mechanism, domain join operations are performed undera read only domain controller (RODC). The following muktiple steps have to performed by read only domain controller (RODC) to process the domain join operation: 1. The computer account has to be created in advance in the directory and further settle certain attributes through the scripts. 2. Alongside, the Password Replication Policy (PRP) of the Read Only Domain Controller (RODC) has to be modified so as to permit the system that you want to join to be cached by RODC. 3. Duplication and replication of the system has to ensured so as to further facilitate the system through joining the domain. 4. Inform the computer that is about to join the domain through offline sources. 5. Finally, test through running a custom script that targets the Read Only Domain Control to facilitate the join. (University of Exeter, 2012) 3. Access networks are dramatically of different types as they con sist of links between connecting the end user systems and the edge routers. The three most pervasive and widespread types are:Dial up, Assymetric Digital Subscriber Line (ADSL) and Hybrid Fiber Coaxical Cable (HFC). Ethernet and switched Ethernet are the commonly classified Local Area Network (LAN) technologies that can be incorporated by megacorp since most of the businesses use it. Mgacorp can additionally focus on the Wireless Local Area Network (WLAN) using the IEEE 802.11d standard that is most frequently

Effect of Computer on Design Creativity

Effect of Computer on Design Creativity Are computers taking away the creativity in design? Abstract Computers are an integral part of todays design process. They, computers represent a time and cost saving device that aids designs in rendering shapes and looking at a broader parameter of possibilities than would be possible otherwise. In looking at design, one must be aware that it represents a part of a business process that has competitive considerations. The foregoing includes costs, materials, innovation, uniqueness, distinction, functionality, and utility in gathering clients and well as customers. The contribution of computers in this highly charged environment has helped to drive down costs, while developing innovation as well as approaches to creativity. As such, designers have been able to expand their creativity through the ability of the computer to permit them to look at more possibilities in their search to arrive at solutions that fit within the preceding parameters. As software programs advance on a technological basis, newer and more powerful programs are increasingly taking on more roles in the design process. This represents the foundation of this examination in that generative design has captured a new part of the preceding in that software can generate designs based upon input parameters. Is the preceding innovative? The answer would have to be a yes. Does the foregoing aid in the business aspects in terms of broadening the range of potential possibilities, and helping to keep costs low? Again, yes is the answer. So, computers do have their place in increasing the efficiency and range of design outputs. The question is, has their role starting to become so large that they, computers are taking over the design function, relegating the designer to a computer operator? Chapter 1 Introduction In equating the question as to whether computers are taking away creativity in design, an exploration into the key words of the examination is seemingly in order. The Houghton Mifflin (2007) dictionary defines generative as â€Å"Having the ability to originate, produce, or procreate†. Design, represents the process whereby one creates, fashions, executes and or constructs according to a plan (Merriam Webster (2007). The design process, depending upon the application that is being utilised, represents trial and error in working through the steps to the final design that fits the parameters of the project (Brown, 2001, p. 2). In order to focus in on the context, design as it relates to architecture, construction and new products such as vehicles, and machines shall represent the core of the examination as represented by the question as opposed to the design of clothing, packaging, and related forms whereby the product is designed based upon primarily internal considerations as opposed to client, and or competitive, and market considerations. As brought forth by McDonagh et al (2004, p. 13): â€Å"As established products have become more similar in technology, functionality, price and quality, companies have turned to design to differentiate their offerings through human-centred innovation and to create stronger emotional connections with their customers. More companies have followed the example of Apple, Braun and Philips, recognising design as a strategic function in their business-not one subservient to marketing, manufacturing or engineering† The design process has increasingly become more competitive in terms of differentiating products, and appealing to clients and customers, as â€Å"†¦companies seek competitive advantage through more integrated offerings, with differentiation through all points of customer contact that express their brand† (McDonagh et al, 2004, p. 13). Thus, design is a critical function most businesses, taking differing forms, thus the election to restrict this examination to the aforementioned categories. Rittel and Weber (1973, p. 158) tell us that design problems are more than just complex, they, design problems, represent what they term as â€Å"wicked problems†. Moran and Carroll (1996, p. 4) in elaborating on the aforementioned advise that design problems â€Å"†¦be stated per se or solved in the sense of definitive answers, because the criteria for evaluating goals and outcomes are innumerable, subjective, and conflicting†. They add that (Moran and Carroll, 1996, p. 4): â€Å"Any solution will generate waves of consequences that interact among themselves and with other problems, changing the problem situation in irreversible and unknown ways. Thus, each wicked problem is merely a symptom of further wicked problems; their solutions cannot even be finally evaluated.† In understanding the nuances as well as ramifications of design, it is necessary to note that design is a process that it usually proceeds under conditions that are represented by a high degree of uncertainty, whereby answers to critical facets cannot be had (Moran and Carroll, 1996, p. 4). The design process also is constrained by real world considerations as represented by time, and budgets, thus the boundaries of the process, design, are not unlimited. Thus, in view of constraints, the design process needs both ingenuity as well as creativity. As brought forth by Rittel and Weber (1973, p. 158), the complexity of design problems make design projects too large for on individual to handle as multiple â€Å"†¦technical disciplines are required, as well as management discipline, in addition to creative and integrative skills† (Moran and Carroll, 1996, p. 5). Evidence supporting the technical difficulties involved in the design process is presented by Brown (1998, pp. 45-46), who states the failure rate for new buildings of all types before construction starts is around 10%. For new products, such as electronics and related categories, the failure rate as a result of design is generally within Browns (1998, pp. 45-46) range, however there are exceptions, such as the 33% failure rate that Microsofts new Xbox 360 is experiencing (DailyTech, 2007). Pressures to get it right represent a critical business decision, whether there is a client involved, or if the design process represents an internal process for the companys own products. Thus, time, cost, simplicity, and failure rate minimisation are critical business concerns that the designer must operate within. Thus, the design function, while being creativity, is also subject to the foregoing pragmatic considerations. Generative design software represents the processes whereby new designs can be automatically produced at the push of a button (Mass Customization Open Innovation News, 2006). The preceding represents computer software taking various design specifications and formulating them into a final design matrix based upon the input variables within the software program (Mass Customization Open Innovation News, 2006). The basic forms, patterns and or objects is modified automatically by an algorithm, thus permitting faster trail and error processes (Mass Customization Open Innovation News, 2006). The process of automatic design generation permits thousands of differing designs to be produced, as well as permitting new ones, as the design process is not restricted to the designers imagination (Mass Customization Open Innovation News, 2006). It, generative design is â€Å"†¦ the power or function of generating, originating, producing, or reproducing† (Merriam Webster, 2007). The designing of architecture, and products represent processes that are three-dimensional (Beilharz, 2004). Parameters as represented by colour, texture, utility design input constraints, space, regulations, gravity, materials, heat (in the case of certain products) and costs are the boundaries to the structure as well (Beilharz, 2004). The application of generative systems to design affects the design process phases and â€Å"†¦ integrates the macrocosmic and microcosmic relations of the design system†. For the purpose of clarification, macrocosmic represents â€Å"and large or complex system or structure made up of similar smaller systems or structures †¦Ã¢â‚¬  (allwords.com, 2007), whereas microcosmic is defined as â€Å" a little world †¦ a community or other unity that is an epitome of a larger unity† (Merriam Webster, 2007). This examination shall look at whether or not computers are taking away creativity in design by focusing on generative design, and how it affects the designer. In delving into the preceding, a number of important areas shall be examined in order to understand the design process, what it entails, along with what creativity is and how it is utilised. Chapter 2 -The Design Process In designing a product, building, vehicle or machine the principle output as represented by the design process is its specification as represented by either an annotated CAD rendering and or a schematic (Moran and Carroll, 1996, p. 324). The design rationale represents the why the design is done in the manner that it is, with the foregoing including various types of information (Moran and Carroll, 1996, p. 324). Fry (1999, p. 22) takes a wider view of design, stating that â€Å"†¦ it is one of the most powerful ways to understand how a world is prefigured, made and acts†. Mitchell (1990, pp. 67-71) explains the design process as one that depending upon the context, takes on differing forms. He explains that the most usual computational variations represent transformations, which he terms as unary, as well as binary operations of shapes as represented in either two dimensional drawings, and or three dimensional geographic models (Mitchell, 1990, pp. 68-69). Mitchell (1993, p. 25) states that there are areas in computer-aided design that fail to support creativity, citing shape emergence as an example. Mitchell (1993, p. 25) argues that: â€Å"that design intentions evolve through the course of a creative design process, that these intentions determine how emergent shapes in drawings will be recognized, interpreted, and reinterpreted, and that interpretation (and reinterpretation) of emergent shapes plays a crucial role in directing design explorations. Traditional computer-aided design systems do not effectively support creative design because they provide only very limited and inflexible ways of interpreting shapes.† In elaborating on the foregoing Mitchell (1993, p. 25) adds â€Å"†¦Computer-aided design systems can, however, be developed on an alternative foundation that provides the necessary flexibility†. Jun and Kim (2003) have a differing opinion of the preceding. They argue that shape semantics in CAD systems offer the potential for the emergence of shape semantics. In presenting their view, Jun and Kim (2003) offer the following rationale: â€Å"Drawings in the early phase of design support both continuity and change in a process of design through the use of two different types of drawings (1): context drawings which hold the evolving design decisions, and exploration drawings which are abstracted from the context drawing and act as graphic probes to investigate selected issues. The notion of emergence in design is found here. The ambiguity of the exploration drawings enables a designer to read more out of a drawing than he or she puts into it; that is, to generate new meanings within the design task. Through exploring drawings that are ambiguous until concept formation (2) is reached, various interpretations, in particular in visual aspect, are possible. As a consequence new drawings emerge. This process plays a crucial role to develop conceptual form in architectural design.† The limitations found in CAD systems are based in the fact that they are fixed, in terms of the representation that are embedded (Jun and Kim, 2003). They argue that there are three types of emergence in the architectural field, â€Å"†¦ shape emergence, shape semantics, and style emergence† (Jun and Kim, 2003). The rationale for this brief look at emergent shape semantics is that it represents a visual design concept, thus representing a segment of creativity (Jun and Kim, 2003). An alternative view of computers and creativity is offered by Kathleen Gibson, an associate professor of design and environmental analysis, who believes that computers actually aid in increasing creativity (Winter, 2003). Professor Gibsons unconventional approach is based upon the rationale that the designer can look at a multitude of differing examples, shapes, configuration and styles as part of their own internal creative processes and potential come up with ideas, shapes, and approaches that they may not have worked on without the aide of a computer to run through variations (Winter, 2003). Mathias (1993) advises that the more time and input designers spend on conceptualising through drawing, visualising as well as re-evaluating designs, the more they, in general, generate new information through multiple reviews and analysis, also resulting in reasoned explanations concerning problems, and proposed solutions. Lawson (1980, p. 6) advises that design represents a mental process that is highly organised, that is capable of manipulating differing as well as many kinds of information. He adds that the preceding blends that data into a set of ideas that is coherent, and finally results on the generation of ideas related to the process (Lawson, 1980, p. 6). Design, as shown throughout this examination, is a process, involving creativity, mental reviews, the manipulation of data and ideas, along with design possibilities, and then synthesising the process toward the end solution. In looking closely at the foregoing, it can easily be deduced that the limitations of the foregoin g are represented by the breathe of experience, exposure and mental foundation bank of the designer. This thus further explains why Mathias (1993) makes his statement that the more time designers spend on ‘drawing, visualising as well as re-evaluating designs, the more they, in general, generate new information through multiple reviews and analysis, the more they see other approaches, solutions and ways in which to accomplish the task, thus heightening their creativity. The explanation of the design process foregoing represents the use of non-creative facets, such as a systematic approach to the design issues and problems (Browne and Smith, 1993, pp. 1209-1218). Hertz (1992, pp. 396) brings forth what he terms as the mental synthesis-creation cycle, which represents the process of exploring alternatives in the development of the design that solves the end product and or building / structure. This represents the same approach, in general conception, as offered by Lawson (1980, p. 6). Chapter 3 Creativity Creativity, as stated by Turner (1994, p. 21) represents â€Å"†¦ the bringing forth of an original product of the human mind †¦Ã¢â‚¬ , which also has what he terms as its â€Å"†¦ mundane side as well†. The creative process is present in all of us. It represents our approach to problem solving for issues that we have not experienced before, through utilising past knowledge combined in new ways to result in a solution (Turner, 1994, p. 21). In equating creativity Weisberg (1986, p. 10) tell us that a solution is creative if it has significant novelty, and is useful. In order to qualify as creative, the new approach, and or solution must be new as well as different from those that preceded it, and, those differences need to be significant (Weisberg, 1986, pp. 12-13). The utility, usefulness, is the second facet present in a creative solution, it must solve the problem in a new, and better manner than those that preceded it, that can include at less cost, fewer parts, faster response time, etc. (Weisberg, 1986, pp. 12-13). In the design process, Cross (1986, p. 15) advises that the special ways in which designers think is embedded in their visual thinking process. Their process of creativity is based in lines, relationships, drawings and formulas representing their approach to problems (Cross 1986, p. 17-18). It must be noted that Dorst et al (1991, pp. 39-40) brought forth that the field of study in terms of design thinking was found lacking in three important areas. Dorst el al (1991, p. 42) identified the preceding as 1. a lack of research clarity, 2. lack of consistency in the tools, methods and theories utilised, and 3. the lack of a common unifying purpose. In defining design thinking, Dorst et al (1991, p. 43) advise that it represents the totality of cognitive activities during the design. The preceding is called ‘design reasoning that is distinguished from inituition as a result of the conscious as well as predictable use of rules representing inference for the outcomes of using and mani pulating design information. The preceding brings forth the facet of intuition as an important part of the process (Dorst et al, 1991, p. 46). It, intuition, resides in the subconscious, which represents the synthesis of experiences, ideas, new approaches and concepts to result in approaches (Dorst et al , 1991, p. 46). In subjecting the preceding to experimentation, Dorst et al (1991, p. 46-48) utilised four designers in a reasoning task that was comprised of a series of architectural drawings for buildings of modest size containing 9 errors. The designers had to locate the errors in a think aloud mode to let their processes be known, which was being recorded, and also making sketches, along with marking the drawings (Dorst et al, 1991, p. 46-48). Later analysis of the recordings resulted in the formulation of two groupings. One represented the mental process of new design generation through changes in the drawings and designs (Dorst et al, 1991, p. 46-48). The second category revealed that the verbal statements made led to new information generation that built upon prior statements they uttered aloud (Dorst et al, 1991, p. 46-48). Their prior histories and experiences represented the database to ascertain the errors, and pose solutions. In commenting upon this Dorst et al (1991, p. 46-48) noted th at the resulting changes were not novel, nor creative, but did solve the errors. The purpose of the foregoing is that the designers were only given a limited time frame in which to conduct their reviews, which demonstrated visual thinking as well as visual reasoning processes (Dorst et al, 1991, p. 46-48). The importance of the preceding is that it brought forth the manner in which designers use visual thinking to stimulate their processes. Wiggins and Schon (1992, pp. 45-51) provide illumination to this direction in advising that drawings and representation represent the manner in which designers communicate, not only with themselves, they also use it to communicate with others in furtherance of their ideas. Important in the preceding, is that designers employ visual thinking that consists of three types of visual imagery. The preceding is represented by what they see, what they imagine, and what they draw (McKim, 1980, p. 26). The foregoing is a highly important point in this examination, thus the rationale for the exploration these areas. Drawings and other visual representations aid in the stimulation process. It is the combination of these factors that are utilised by designers in the process of creating new designs and creative solutions. Further elaboration on this process is important in understanding the manner in which visual representations aid the design, and creative processes. Wiggins and Schon (1992, pp. 102-122) tell us that drawings help the designer in seeing, interpreting what can be potentially moved, re-evaluated, and or transformed. Tovey (1989, pp. 26-31) argues that seeing is an important part of the design process as it aids the designer in imaging, which prompts creativity and drawing. The preceding three processes work together to encourage visual thinking. The connection between the use of computers as an aid in this process will be further explored to draw upon examples that either support or refute if generative design impacts the designer, and if it aids or diminishes creativity. Herbert (1988, pp. 26-40), in his exploration of the design process states that once a designer begins to perceive the task, images, and or pictures representing solutions start to be generated in the designers mind. He adds that in the beginning of the process, these images, pictures, ideas and thoughts are not really well defined, thus needing further development (Herbert, 1988, pp. 26-40). The next stage on the process moves towards more refinement as potential solutions, a means to these ends and the routes and ideas as to how to arrive there start to develop (Herbert, 1988, pp. 26-40). The foregoing was brought forth by Mathias (1993) who advised that designer tends to utilise drawing as a means to move to developing their first ideas, and in later stages of the process, drawings are utilised for synthesis. This is what Mathias (1993) describes as stepping back and then forward in the mental processes to be engaged, and then reflect on what has been thought, to re-engage the pro cess again. Mathias (1993, pp. 113) diagrams the preceding as follows: Diagram 1 Designers Framework for Idea Development (Mathias, 1993, p. 113) Analysis of problem statement Holistic solution concept Problem Solution concept Convergence Exploration Validation Solution Mathias (1993) and McKim (1980) follow the same conceptual foundation in terms of imagery (drawings), representing a foundational facet in the design process. The preceding is part of the creative mental synthesis process whereby ideas begin as a result of engagement with the project. Verstijnen (1997), conducted experiments based upon the research methods of Finke (1990) as well as Helstrup and Anderson (1993). The six experiments conducted by Verstijnen (1997) used undergraduate industrial design engineering and psychology students to investigate emergent figures and drawing / sketching relationships. The experiment called for some students to utilise sketching and drawing, and the others to use mental processes only in resolving the problem of wire frame drawings that had figures embedded (Verstijnen, 1997). The second experiment represented the investigation of creative mental synthesis tasking asked to generate shapes that were creative based upon a cube, sphere and cone. The results indicated that the restrictions of memory was not a motivating factor in sketching as an aid in creative mental synthesis experiments (Verstijnen, 1997). In the reinterpretation of shapes, the task proved difficult based upon the utilisation of imagery alone, thus suggesting an aid was needed, drawing (Verstijnen, 1997). She added that sketching for use in synthesis may not play a significant, and or important role, however in creative mental synthesis, sketching helped to yield a higher number of creative forms (Verstijnen, 1997). A comparison of the engineering students, and non-students was not included in her study (Verstijnen, 1997). From the foregoing, the data thus far reviewed seemingly indicates that visual thinking represents an important facet of creative mental synthesis, which is important in the design of new objects. The foregoing also seems to point to the fact that the manipulation of visual images in a mental mode is an important aspect of mental creative synthesis. In addition, the preceding seems to also point to the fact that drawing is important in supporting the process of creative synthesis in new design. The use of the word seemingly and seem are utilised as there is little to no empirical evidence to support the preceding, thus the views are based upon the views as expressed by a number of authors and researchers. Chapter 4 Generative Design In generative design, the description and design of relationships and components is accomplished by the use of powerful algorithms (MacDonald et al, 2005). These algorithms permit users to manipulate geometry and dynamically model through the application of rules that capture relationships in geometric features, along the defining of complex forms (MacDonald et al, 2005). Under a generative design program, the designer, utilising a CAD tool that specifies parameters and the restraints, the program then generates a number of outcomes that the designer then utilises as input, and or for another generation of shapes, forms or approaches, solutions (MacDonald et al, 2005). The generative design approach is applicable in the whole design process, once the parameters have been input and modified (Gatarski and Pontecorvo, 1999). Generative design has been employed in the development of cars, cell phones, structures and other areas. CAD and Design Automation software has long been utilised to optimise the assembly of differing design elements. Through the use of visualisation software, designers are able to see the results without having to build prototypes. In the generative design methodology, outcomes are rendered after a detailed and high level of input specification, thus saving time over the CAD and Design Automation approach that requires time in that each instance of an idea has to be imagined, manually expressed, and evaluated (Gatarski and Pontecorvo, 1999). On the most basic level, generative design systems consist of four elements (Gatarski and Pontecorvo, 1999): design representation, generation engine, expression engine, mechanism for evaluation and selection of the new generated specifications The following, further explains the workings within these steps (Gatarski and Pontecorvo, 1999): design representation, The design representation are input as a set of parameters, along with the corresponding constraints. In the preceding, the parameter sets represent the genetic design elements, defining the form as well as structural aspects. The constraint set controls the aesthetic as well as the fabrication facets, meaning the limitations as afforded by the material dynamics to be utilised. The foregoing constraints, and rules thus place a limit on the range of the generated design. generation engine This aspect of the generative design process represents the internal process that generates the new design descriptions. It represents a set of prototype design descriptions that are also termed as ‘parents, and then utilises the algorithm to take the parameter sets and combine them into new descriptions, or children. In general, the algorithms use operations that are based upon the concepts found in the mutation and crossover aspects found in genetics. The preceding thus ensures that the descriptions, children, are drawn from the parameter values as contained in the prototype set. expression engine In the process of generative design, the expression engine interprets the descriptions, rendering them into a structure or model. The process can be set so that it is modular, thus permitting it to be able to support a host of alternative interpretations. mechanism for evaluation and selection of the new generated specifications The generative design approach is based upon having an objective function that evaluates the fitness output of the specifications of the design. In creative design area this facet is usually embedded in the human using the system. The foregoing is termed the human user in the loop as it provides a more intelligent and analytic capability as opposed to computed functions. The preceding is described as being a better match for the ranges of possibilities offered by the generative approach. Generative design offers the ability for designers to try as many ideas as possible, a critical facet when time is a constraining factor. It permits designers to thus present a variety of solutions that can thus be evaluated internally and or through focus group testing to refine the process and move to the final design variables. The foregoing recognises the fact that the design process has always been a process that is subject to the acceptance of the end user, which is either the client, or the general public. It, generative design, thus represents a means to work through a wide variety of approaches to achieve faster approximations of what will work. Chapter 5 The Role of Computers If computers are potentially limiting, and or taking away design creativity, it would seem appropriate to example the role of computers in the design process and attending questions. In the pragmatic sense, unlimited time to render and use a design is not a function of the design process. Whatever the function, be it architecture or products, there is a limited time frame for the design process to take shape, evolve, become proven through mathematical, structural, component material and cost / build considerations. The preceding represent constraints on the process that are real as well as binding. Computers have advanced the process of design through software such as CAD that enable users to perform a number of functions in time saving fashion. The preceding takes in such functions as (SAP, 2006): wire frame geometry creation, solid modelling, 3D parametric, freeform surfaces, automated assembly design, engineering drawings from solid models, re-utilisation of design components ease on design modification and the generation of multiple versions, automated generation of design components, design simulation without prototype building, data exchange, as an aid in visualisation process for areas such as rotation, shading, etc., design studies as a few of the more important, or used functions. In equating this segment of the examination, the question of creativity resurfaces. As previously mentioned by Turner (1994, p. 21), creativity brings  ·Ã¢â‚¬ ¦ forth of an original product of the human mind †¦Ã¢â‚¬ . In the design process, it aids in the production of multiple view, as well as ideas. Gero (1991) indicates that there are, in his view, five creative design processes that result in the introduction of new variables in the design prototype. These are (Gero, 1991): Combination Mutation Analogy First Principles, and Emergence The following sets forth the preceding in more detail Combination Gero (1991) tells us that ‘combination represents the combining of two or more prototype designs, with the new resulting variable introduced into the original from the former. Within this process, mutation represents the alteration of variables as accomplished by external agents (Gero, 1991). Mutation Within the preceding process, mutation represents the alteration of variables as accomplished by external agents (Gero, 1991). Through mutation, new variables can result due to extrapolation, and or combination of the variables (Gero, 1991). Analogy This is also known as ‘case-based reasoning, representing structural elements applied by one prototype design into another design problem, as well as the use of past processes for a new design problem (Gero, 1991). First Principles The above is a process whereby new relational knowledge is logically derived from the behaviour of existing structures without the knowledge of the prototype (Gero, 1991). Emergence The process of inferring structural elements that are new through the extension of elements that exist, represents emergence (Gero, 1991). Indurkhya (2002), in defining creativity from a different perspective, provides insight into Geros (1991) concept of new variable introduction. H

The Role of Teachers in Preventing Child Abuse :: Schools Role in Preventing Child Abuse

There are various strategies used within schools to tackle child abuse. In order to discuss the strategies fully there is a need to define what exactly is meant by child abuse. It is also necessary to be aware of what advice and guidance there is offered through Government documentation and circulars to schools on their role in preventing child abuse. Having put child abuse and the school's role into context, then the strategies used by the school as a whole and by the teacher within the classroom can be discussed. Therefore what exactly is meant by child abuse? There is a tendency to automatically assume that abuse means sexual abuse. The 1986 draft report by the Department of Social Security [DHSS], Child Abuse - Working Together defined child abuse as falling into six categories: physical abuse, physical neglect, failure to thrive, emotional abuse, sexual abuse and potential abuse. The present definition for child abuse according to Department for Education and Skills [DfES] Circular 10/95 has been narrowed down to include only four categories: Ø sexual abuse -physical signs or a substantial behaviour change Ø emotional abuse -excessive dependence or attention seeking Ø physical abuse - regular broken bones, bruises, lacerations and burns Ø physical neglect - inadequate clothing, poor growth, hunger, or apparent deficient nutrition These are the guidelines from which schools work. However, what we as a society perceive as abuse may in other cultures/societies be seen as normal practice. There are many cultures for example where young girls, twelve years of age are taken as brides. Much publicity has been given recently to the plight of Muslim women under the Taliban regime. Females have been treated as property, not as equal citizens and suffered as a consequence. The guideline produced by Liverpool City Council for its schools actually contains within it a policy on female genital mutilation [Liverpool City Council, 2000]. This form of 'abuse seems totally abhorrent to our society, but again is an accepted form of behaviour by other

Performance Pay at Safelite Essay

Safelite was the largest nation-wide auto glass company in the United States with about 500 stores, more than 3000 employees and 3000 trucks. The company has started mobile services and gained 12% of market share. Although Safelite offered mobile service from virtually all of its stores by the early 1990s, the main focus of the company was to serve the customers at their place and the trend of the stores was decreasing so forth. The incentive was $1000 to open a new store as bonus. So every employee tried to open a new store rather working hard and improving the production. The employees of the Safelite were required to work for eight hours and according to the CEO John Barlow, they were only putting in windshields for two and a half hours. They were not putting their complete efforts and loyalty to the company. Wasting their times and not working for what they were paid. The other reason of the low productivity was the popularity of mobile service, which decreased the demand of the store-based services, and the customer’s trend was changing to mobile service rather than store services. The other reasons includes the customer was not at the location where the mobile truck was called when the technician arrived or the technician was given the bad directions of the technician failed to understand the direction given by the customers. The employees didn’t put their complete efforts to the work and they were not working hard. Another reason was the problem understanding of the customers. Many of the technicians were not able to understand the complete problem of the customers. They came to know the problem when they reached the customers place. Sometimes the technicians were not carrying their appropriate tools, which were needed in the repairing for the customers. The mobile truck was liable to travel to the location where customer calls them. The reason of that was stores were not easy to find. It was because the stores were not well located; they were simply opened for the sake of adding more locations and were not always located in the prime service areas. John Barlow also added that if the location is not well located so why a customer bothers to find and go to the store. The fleet of the trucks became unable to justify its own cost. The company was seeing one repair job per truck per day to be maintained but they thought that this is a little expense. Individual technicians were installing an averag e of only 2.5 glass unit a day. It was the very bad performance than that of they had expected. Since the installation of a single windshield generally took less than an hour to complete. And lastly, some DCC managers didn’t cared to hustle and assigned jobs equitable rather than funneling more jobs to those technicians who worked the fastest.

A Doll’s House by Henrik Ibsen

The play â€Å"A doll’s house† is written by Henrik Ibsen and was adapted into a film in 1973. It deals with gender discrimination in the Victorian age. It highlights specifically the paths women of the West have treaded to find respect and equality. Ibsen makes it possible to imagine the barbarities that existed within the law and society of those times. Through the years, controversial writings like these, have intentionally or unintentionally forced women to rise up and reclaim their rightful legal and civil rights. In the Victorian Period law dictated that property; children and income belonged solely to men. Divorce or Separation was unthinkable. Women who worked were frowned upon by society. Their status was equivalent to the slaves, criminals or the insane. The main role of a woman was to reproduce children, keep the house clean, and feed the children while their husbands worked. It is sad that although women in the developed world have found equal rights in this century through various equal rights acts and amendments however the women of the developing world still lack basic rights and struggle everyday between gender power relationships. The entire film takes place at Mr. and Mrs. Torvald Helmer’s Apartment. The film is set in Norway in the late 1800’s during Christmas time. This one room shows various shades of hypocrisy, discrimination, arrogance and dishonesty exhibited by society. The room is a microscopic vision of the world. It shows the plight and suffering of every woman in every household all around the world. The fact that Nora does not leave the room throughout the film shows how she is entrapped in this Victorian Doll House. The protagonist of the film is Nora, a Victorian middle class woman. She is ruled by her husband and complete oblivious to her state of unfulfillment. She is thrown into a difficult situation and to protect her husband and family commits forgery. Unaware of the legal consequences she tries dishonestly to obtain a loan. She sits on a puffy pink cloud thinking that her special status would always protect her and her kids in the eye of the state. However, the law expects her to know better. The hypocrisy of the system hits Nora and she tries to break out of her Victorian Doll like shell. She desires a life less frivolous, so she decides to work independently and earn money. She starts enjoying this new found freedom. Her relationship with her husband also spirals downwards and sows the seed of doubt and self reflection. Ibsen broke boundaries when he ended the original play with Nora rebelling against her husband, her father and ultimately the patriarchal society. However, the controversial ending caused shock and disagreement and forced him to change the ending. He later on lived to regret the change. The theme of the play made audiences agree that women should get equal pay for equal work; equal rights to enjoy an independent self sufficient life; rights to child custody and divorce; equal stature in legal matters; Equal access to knowledge. It is unfortunate that Victorian times were so suffocating that Nora had to leave her husband or she would continue to be treated as nothing more than a mere rag doll. She was just an inanimate object, dispensable by others and deserved no respect, rights or esteem. Works Cited Page: Johnston, Ian. (July 2000). On Ibsen's A Doll's House. Johnstonia. Retrieved April 3rd 200. http://www.mala.bc.ca/~johnstoi/introser/ibsen.htm Gillis, G. J. and Westhagen, Jen. SparkNote on A Doll’s House. 2 Apr. 2007 .          A Doll’s House by Henrik Ibsen The play â€Å"A doll’s house† is written by Henrik Ibsen and was adapted into a film in 1973. It deals with gender discrimination in the Victorian age. It highlights specifically the paths women of the West have treaded to find respect and equality. Ibsen makes it possible to imagine the barbarities that existed within the law and society of those times. Through the years, controversial writings like these, have intentionally or unintentionally forced women to rise up and reclaim their rightful legal and civil rights. In the Victorian Period law dictated that property; children and income belonged solely to men. Divorce or Separation was unthinkable. Women who worked were frowned upon by society. Their status was equivalent to the slaves, criminals or the insane. The main role of a woman was to reproduce children, keep the house clean, and feed the children while their husbands worked. It is sad that although women in the developed world have found equal rights in this century through various equal rights acts and amendments however the women of the developing world still lack basic rights and struggle everyday between gender power relationships. The entire film takes place at Mr. and Mrs. Torvald Helmer’s Apartment. The film is set in Norway in the late 1800’s during Christmas time. This one room shows various shades of hypocrisy, discrimination, arrogance and dishonesty exhibited by society. The room is a microscopic vision of the world. It shows the plight and suffering of every woman in every household all around the world. The fact that Nora does not leave the room throughout the film shows how she is entrapped in this Victorian Doll House. The protagonist of the film is Nora, a Victorian middle class woman. She is ruled by her husband and complete oblivious to her state of unfulfillment. She is thrown into a difficult situation and to protect her husband and family commits forgery. Unaware of the legal consequences she tries dishonestly to obtain a loan. She sits on a puffy pink cloud thinking that her special status would always protect her and her kids in the eye of the state. However, the law expects her to know better. The hypocrisy of the system hits Nora and she tries to break out of her Victorian Doll like shell. She desires a life less frivolous, so she decides to work independently and earn money. She starts enjoying this new found freedom. Her relationship with her husband also spirals downwards and sows the seed of doubt and self reflection. Ibsen broke boundaries when he ended the original play with Nora rebelling against her husband, her father and ultimately the patriarchal society. However, the controversial ending caused shock and disagreement and forced him to change the ending. He later on lived to regret the change. The theme of the play made audiences agree that women should get equal pay for equal work; equal rights to enjoy an independent self sufficient life; rights to child custody and divorce; equal stature in legal matters; Equal access to knowledge. It is unfortunate that Victorian times were so suffocating that Nora had to leave her husband or she would continue to be treated as nothing more than a mere rag doll. She was just an inanimate object, dispensable by others and deserved no respect, rights or esteem. Works Cited Page: Johnston, Ian. (July 2000). On Ibsen's A Doll's House. Johnstonia. Retrieved April 3rd 200. http://www.mala.bc.ca/~johnstoi/introser/ibsen.htm Gillis, G. J. and Westhagen, Jen. SparkNote on A Doll’s House. 2 Apr. 2007 .         

Solution Focused Brief Therapy and Postmodern Social Constructivism

Solution Focused Brief Therapy and Postmodern Social Constructivism General Overview of Social Construction Therapies Social construction theories are considered to be based on certain concepts such as special questions to be asked during individual and group counselling sessions and a strategy based on change process vision. In this respect, constructionist approach presupposes case conceptualisation and treatment goals that differ from merely gaining knowledge and counselling sessions.Advertising We will write a custom essay sample on Solution Focused Brief Therapy and Postmodern Social Constructivism specifically for you for only $16.05 $11/page Learn More Case Conceptualisation Similarities As Solution Focused Brief Therapy approach and the Postmodern Social Construction perspective are very similar, it is necessary to mention that one of the similarities concern the case conceptualisation used in both therapies. As reported by Pichot Dolan (2003), â€Å"understanding of solution-focused therapy would be best viewed as a journey rather than a destination† (Pichot Dolan, 2003, p.5); this can be also applied to Postmodern Social Constructivism approach. In other words, both therapies are aimed at structuring of the process on the level of concepts of what is ‘good’ and what should be changed. Differences The main difference between Social Constructivism and Solution Focused Brief Therapy is that the former therapy uses identifies artefacts and their meaning whereas the latter defines a goal to achieve and outline the methods to use in the process of counselling. Actually, the Solution Focused Brief Therapy is almost based on the concepts invented within the Social Constructivism theory. Treatment Goals Similarities The main similarities of the two therapies mentioned above include the analysis of the current situation rather than analysis of some past events. Moreover, both therapies are aimed at consideration of the situation in a certain social context. Thus, both therapies im plement some structuring of the process. Solution Focused Brief Therapy and Postmodern Social Constructivism approach are goal-focused and are not concentrated on what can be referred to as problem analysis, problem statement. These therapies do not find out what is wrong but rather identify what should be in the end of the therapeutic session. Differences Schaffer (2006) suggests the main peculiar feature of Social Constructivism theory as the one that the approach is not based on mere knowledge but is put into certain environment with its consequences, setting, and context as a whole. In this respect, the Social Constructivism theory is focused more on identification of artefacts and their meaning regarding the social context and analysis of what is ‘wrong’ and should be eliminated.Advertising Looking for essay on psychology? Let's see if we can help you! Get your first paper with 15% OFF Learn More On the other hand, the Solution Focused Brief Therapy does not analyse the wrong and the right. It is aimed at construction of the final result by means of identifying what to achieve and only then outlines the steps including what to keep and what to change. Cases When Each Therapy Can Be Beneficial Each therapy can be beneficial in cases of alcohol and drug addiction; these therapies are very much alike and can be helpful during counselling sessions when a patient is not analysed as the one who did something wrong and the reasons for that. The sessions should be constructed in accordance with the abovementioned therapies because a patient should reach a goal in the end. Change Process and Rationale I think that Solution Focused Brief Therapy most closely reflects my beliefs about the change process when a counsellor helps a patient to transit from the current situation to a desired condition. I think so because this therapy is mostly aimed at reaching the goal instead of analysing the past and concluding. Reference List Pich ot, T, Dolan, Y. M. (2003). Solution-focused brief therapy: Its effective use in agency settings. London: Routledge Schaffer, H. R. (2006). Key concepts in developmental psychology. London: SAGE Publications Ltd.

Labour Law Assignment Essay Example

Labour Law Assignment Essay Example Labour Law Assignment Essay Labour Law Assignment Essay INTRODUCTION:- 1) Definition of Industry As per Section 2(j) of Industrial Disputes Act, 1947 â€Å"Industry† means any systematic activity carried on by co-operation between an employer and his workmen (whether such workmen are employed by such employer directly or by or through any agency, including a contractor) for the production, supply or distribution of goods or services with a view to satisfy human wants or wishes (not being wants or wishes which are merely spiritual or religious in nature), whether or not,- Definition of industry before amendments in 1982:- Industry means any business, trade, undertaking, manufacture or calling of employees and includes any callings, service, employment, handicraft or Industrial occupation or avocation of workmen. ) any capital has been invested for the purpose of carrying on such activity; or ii) such activity is carried on with a motive to make any gain or profit, and includes- a) any activity of the Dock Labor Board established und er section 5-A of the Dock Workers any activity relating to the promotion of sales or business or both carried on by an establishment, but does not include- b) Any agricultural operation except where such agricultural operation is carried on in an integrated manner with any other activity (being any such activity as is referred to in the foregoing provisions of this clause) and such other activity is the predominant one. Explanation:- For the purposes of this sub-clause ,† agricultural operation† does not include any activity carried on in a plantation as defined in clause (f) of section 2 of the Plantation Labour Act,1951 1) hospitals or dispensaries 2) educational, scientific, research to training institutions 3) institutions owned or managed by organizations wholly or substantially engaged in any charitable ,social or philanthropic service, any activity of the Government relatable to the sovereign functions of the Government including all the activities carried on by the departments of the Central Governments dealing with defense research , atomic energy and space 4) any domestic service ) any activity ,being a profession practiced by an individual or body of individuals ,if the number of persons employed by the individuals or body of individuals in relation to such profession is less than ten 6) Any activity , being an activity carried on by a co-operative society or a club or any oth er like body of individuals , if the number of persons employed by the co-operative society ,club or other like body of individuals in relation to such activity is less than ten 2) Definition of Industrial Dispute As per Section 2(k) of ID Act, 1947 â€Å"industrial dispute† means any dispute or difference between employers and employers ,or between employers and workmen, or between workmen and workmen , which is connected with the employment or non-employment or the terms of employment or with the conditions of labour , of any person Industrial dispute means any dispute or difference between – Three ingredients are:-  ¦ Any person who is a workman employed in an industry can raise an industrial dispute. A workman includes any person (including an apprentice) employed in an industry to do manual, unskilled, skilled, technical, operational, clerical or supervisory work for hire or reward.  ¦   It excludes those employed in managerial or administrative capacity. In dustry means any business, trade, undertaking, manufacture and includes any service, employment, handicraft, or industrial occupation or avocation of workmen EXAMPLES:- 1) While Tata Motors has decided to move its Nano factory out of Singur after violent protests by farmers, this isnt the first time that there has been a standoff between industry and farmers unwilling to surrender land. )   In August, the Supreme Court gave South Korean steel firm POSCO the use of large swathes of forestland in Orissa for a $12-billion plant that protesting farmers said would displace thousands of people. The protests delayed the start of construction on the plant, which could be Indias single biggest foreign investment to date. 3) In the same month, the Supreme Court allowed Vedanta Resources to mine bauxite in hills considered sacred by tribal people in Orissa. The mining would feed an alumina refinery, part of an $800-million project that has been widely opposed. Environmentalists say the open- cast mine will wreck the rich biodiversity of the remote hills and disrupt key water sources vital for farming. 3) Definition of Workman As per Section 2(s) of ID Act, 1947 workman† means any person (including an apprentice) employed in any industry to do any manual ,unskilled ,skilled ,technical ,operational ,clerical or supervisory work for hire or reward ,whether the terms of employment be express or implied ,and for the purposes of any proceeding under this Act in relation to an industrial dispute ,includes any such person who has been dismissed ,discharged or retrenched in connection with ,or as a consequence of ,that dispute ,or whose dismissal ,discharge or retrenchment has led to that dispute ,but does not include any such person- i) who is subject to the Air Force Act,1950 (45 of 1950),or the Army Act,1950(46 of 1950), or the Navy Act,1957(62 of 1957) ii) who is employed in the police service or as an officer or other employee of a prison iii) Who is employed mainly i n a managerial or administrative capacity iv) Who being employed in supervisory capacity, draws wages exceeding Rs. 1600

A Comparison of the Bandar and Cowboy Star Restaurant Butcher Restauant

A Comparison of the Bandar and Cowboy Star Restaurant & Butcher Restauant The Bandar and Cowboy star restaurant butcher restaurants compare by both restaurants serving cuisine that is natural and conventional based rather than fast foods. In regard to this, both serve fresh livestock meat and seafood. Also, both restaurants have incorporated wine in their menu which is optional for customers and a separate room exclusive for alcoholic drinks for interested customers (Bandar Persian Prime Restaurant, 2018). On the other hand, they differ by offering more specified and diversified meals; Bandar incorporates vegetables in their meals while Cowboy focuses more on meat products for their customers (Cowboy Star Restaurant and Butcher Shop, 2018). What positively influences both restaurants towards attracting and retaining their customers is the quality of their products. Considering they offer natural foods is a great motivation especially towards the customers who prefer organic foods. Additionally, there is the incorporation of vegetables upon request which caters well for the vegetarians since not all customers prefer meals based on meat products. Similarly, both restaurants offer meat products which can be considered as a negative influencer to the customers who totally disregard meat products and its association. Owing to this, there are customers who can entirely avoid the restaurants on the basis of animal product association. Additionally, seafood presents a mixture of reactions among customers; it is the most favorite to some while others disregard it but are comfortable with other livestock products. Furthermore, the involvement of alcoholic drinks in the form of wine or beer is not perceived positively by all customers despite being optional and may discourage potential clients of different faith/religion. Depending on the nature of customer, this may, therefore, act as a drawback.

Historical Criticism of Graham Greene's The Power and the Glory Essay

Historical Criticism of Graham Greene's The Power and the Glory - Essay Example Vol I). Sherry also informs us that as a young boy of 14 he suffered at the boarding school. His acquaintances and his experiences were shaping a mind which paralleled the tumultuous time he lived in. He ran away from home. And was sent for psychoanalysis. In 1925, he met Vivien Dayrell-Browning. A Roman Catholic conver, Vivien molded him toward Roman Catholicism, to which he got converted at the age of 26. His religious belief followed a trajectory vividly depicted in his catholic tetralogy: "Brighton Rock" (1938), "The Power and the Glory" (1940), "The Heart of the Matter" (1948), and "The End of the Affair" (1951). In fact, Greene's life is a reflection of the saga of Roman Catholic Church at that time. As Mark Bosco says that Greene's writings represent different phases of his Catholic sensibility. He emerges mature with liberation theology after Vatican Council II (Bosco 115-117). The novel draws parallels with T.S. Elliot's poem "The Hollow Men". The hollow men wander in a barren landscape, trying to remember the line after "For Thine is the Kingdom" in the Lord's Prayer. The phrase happens to be "the Power and the Glory" (Ways of Escape 65-68). Not only the theme, but even the milieu and the settings set Greene's novels apart. "The Quiet American" is set in the Vietnam of the early 50s, "The Heart of the Matter" is set in West Africa, "Our Man in Havana" in Cuba, "The Honorary Consul in Paraguay/Argentina. Greene was a globe-trotter. From Africa to Asia to Latin America, he had his share of experiences everywhere. A man who wrote "England Made Me", Greene spent the last 25 years of his life in exile in France. This is not surprising then to find that all but a few of his post-war novels are set outside Britain. His authorized biographer Norman Sherry suffered tropical diabetes in Liberia, dysentery in Mexico and intestinal gangrene in Paraguay in the course of his research. Sherry links Greene's constant urge to be on the move to his escapist tendency and an escape from the responsibilities of life (Sherry 350-354 Vol. I). His penchant for travels also stems from his love for Joseph Conard. Mr. Greene suddenly becomes a character out of the Conrad stories he admired. He exposes himself to all sorts of pain and jeopardy. He explores hitherto unpenetrated jungles. He climbs mountains, crosses wild and unbridged rivers, endures the pain and vulnerability of tropical sicknesses. He looks everywhere, it seems, listens with respect to the most obscure of his fellow human beings and thereby not only learns about and from others, but finds the direction of his own life's compass (Coles). Like his shifting destinations during the course of frequent travels, Greene's faith too followed a shifting trajectory. Today Catholicism is once again the topic of discussion thanks to Dan Brown's murder mystery "The Da Vinci Code." Before Brown's best-seller, Catholicism as a theme of a novel was a strange idea for the readers. As Lawson makes us believe: Today, Catholicism, wanderlust and expatriation all lack the attraction they had for writers in Greene's time. The centre of gravity of

Society and Political Sciences Essay Example | Topics and Well Written Essays - 1000 words

Society and Political Sciences - Essay Example However, in the world of sociology and study of theories, the word "welfare" is preferred over happiness. This is to say that how much value that end result has on the person, relates to how much "welfare" he gets out of it. Rights and Justice: "All human beings are born free and equal in dignity and rights. without distinction of any kind, such as race, color, sex, language, religion, political or other opinion, national or social origin, property, birth or other status. Everyone has the right to life, liberty and the security of person" says the UN Human Rights Declaration website. These three statements merely cover the first basic rights to being called human. Today, we see justice being called in accordance with the law. But, still in many places today we see assassinations of rights being made to keep the law clean, to simply have justice. This so called justice, as the book defines it, is slashing away people's throats just to do what the law feels is appropriate. The war on terror is the biggest example we have today which has led to the deterioration of man, in pursuit of dreams of "advancement" and "power". Deal terror with justice, pose war on terror, abolish capital punishment, stop child ab use, stop violence against women, have proper arms control etc are issues we deal with when we talk about law. But, most of the time, we are faced with complexities when we start defining limits and learn that things are so deeply mixed together that it's difficult to not have dilemmas when dealing with human rights and justice. Does America deal with it better than other countries, is still a question left unanswered. The Market System: This concept pertains to establishing boundaries and limits that define how economic, social and political forces interact to form a system called the Market System. With the help of a market system, coordination between these forces is maintained and given a boost as when required. It erases confusion and directs by giving away what responsibilities each role carries. According to this system, even the smallest things are not avoided and the resulting picture is complete with collective goals, control and continuity. Cost-Benefit Analysis: This relates to how governments set their regulations through the use of measuring up their decisions and options carefully. This method is called the cost-benefit analysis since each option is carefully weighed out. It is important to employ this rule, since it's essential to our existence that we think about the future as well when making decisions. The kind of effects one's decision can have on for instance our future generations is one example. When cost-benefit analysis is accurately incorporated in ruling a country or simply making any decision, it automatically becomes effective. Kantianism: This is a moral theory that was coined by Immanuel Kant. Kant proposes that intentions play a great role in praising or punishing a person's acts. A person's purpose or drive behind his action is the main factor that results in the outcome being labeled good/praise-worthy or bad/punishable. Hence, this concept relates to morality, because

Oprtions Mngement Essay Example | Topics and Well Written Essays - 3000 words

Oprtions Mngement - Essay Example The contribution of n opertions strtegy is lso outlined s prt of hierrchy of strtegies tht we might find in ech firm. It gives n insight into wht is exctly n opertions strtegy nd wht re its components, how esy is it to implement such strtegy nd wht cn n orgnistion expect from it. Bsiclly, the pper discusses the question of diversity of tsks tht opertions mngement incorportes nd tht these tsks should be combined to rech the potentil of opertions executed. Opertions mngement hs its origins in the study of 'production' or 'mnufcturing mngement'. (Pine, Boynton, 2003) These terms still very much pply to mnufcturing orgnistions tht will hve distinct opertionl ctivities tht convert sy, bens nd rich tomto suce into cns of bked bens to be sold by retiler. Thus, we cn initilly think of opertions mngement s being prt of distinct function producing product nd service combintion, just s we hve mrketing nd ccounting functions in mny orgnistions. The first definition of opertions mngement is therefore: Every orgnistion tht offers goods or services hs n opertions ctivity. s fr s the orgnistion structure is concerned, some firms will hve discrete opertions function. This might be clled mnufcturing deprtment, n opertions system, or hve no identifible nme t ll. However, like mrketing nd ccounting, it is fundmentl function of the firm with professionlly trined opertions or production mngers responsible for conversion of resources into the required product nd service combintions. In some orgnistions such mngers will hve different titles, store mnger for retiler, dministrtive mngers within hospitl or distribution mngers in logistics compny. This first definition tends to be rther nrrow s it pplies to core conversion processes (mostly mnufcturing). We need therefore to widen the definition of opertions mngement to second level: The design, opertion nd improvement of the internl nd externl systems, resources nd technologies tht crete

The impact of the internet on speeches or debates in campaigns Essay

The impact of the internet on speeches or debates in campaigns - Essay Example All these debates are live telecasting by the television and internet media. Many people have the belief or myth that only the opinions expressed by the presidential candidate have the power to influence the public opinion. According to Postman (2005), â€Å"Indeed we may have reached the point where the cosmetics has replaced ideology as the field of expertise over which a politician must have competent control†(Postman, 2005, p.4). In other words, the appearance and body languages of the speaker can influence the public immensely. Internet is a medium in which people often discuss the appearance, views and opinions expressed by the candidates. The outcomes of these debates may definitely influence the result of the election. This paper analyses the impact of the internet on speeches or debates in campaigns. Internet and campaigns â€Å"The idea that there is a content called â€Å"the news of the day† was entirely created by the telegraph which made it possible to de contextualized information over vast spaces at incredible speeds† (Postman, 2005, p.8). Instant communication is made possible with the introduction of internet. It is easy for a person in America to communicate with a person in India or Africa instantly using different means of internet based communication. For example, social networks are influencing the people immensely. According to a recent report, Facebook membership has already crossed 1000000000. It should be noted that these people are communicating each other through social networks and exchange their ideas about everything in this world. The use of discussion forums, weblogs (commonly known as blogs), and online discussion groups, allow ongoing dialogues between the candidate, campaign staff, volunteers, and supporters. The Internet’s virtual nature enhances the number and diversity of people participating in campaign discussions, creating â€Å"global conversations that previously would have occurred only i n local groups and conferences (Rice, 2004, p.4) The ongoing political debates between president Obama and his opponent Mitt Romney is watched anxiously by millions of the people all over the world. The recent debate between President Obama and his Republican Party opponent Mitt Romney, about the economic policies of America has been watched with interest by Americans as well as the people in other parts of the world. Reports show that Romney gained an upper hand over Obama after this debate. Plenty of debates are going to happen between these two contesters in near future itself. â€Å"One-third of online adults (33%) say that it is usually easy for them to tell what it true from what is false when it comes to the political information they find online, while 56% say that it is usually difficult for them to determine this† (Attitudes towards the internet’s impact on politics, 2010). One of the major advantages of communication through internet is the ability to stay a nonymous. Internet is a medium through which the unspoken truth and rumours can be spread without fear. For example, it is possible for an Obama fan or a democrat to work against Obama using internet. In fact thousands of political workers are working for their candidate through internet and social networks. These political workers are spreading truths as well as myths or rumours. In politics, only opponents are there

Service Oriented Architectures Essay Example | Topics and Well Written Essays - 3000 words

Service Oriented Architectures - Essay Example â€Å"Just as the Databases were at the center of design of applications of the 70s and 80s, Components are at the center of design of the applications of the 90s and the next century† – David Vaskevitch, VP, Microsoft. Almost anyone with a sufficient amount of experience in the world of information technology would agree that the concepts of ‘Objects’ have drastically changed the way, large scale software systems are built and deployed. Objects are the basis for advanced graphical user interfaces. Their power comes from their single most useful feature of reusability. Objects are built in such a way that they can be used to build ‘components’ that can be collaborated across multi-vendor platforms. These component based architectures have modernized the way large scale enterprise level software systems are built. The large scale success of component-based architecture has lead to the development of Service Oriented Architectures (SOA). The concept of SOA is an evolution of the Component Based Architecture in which the enterprise’s architecture is developed in a ‘Service-Driven Approach’. Service driven approach means that the requirements of an infrastructure are broken down into multiple components; each component providing a distinct service and each service is autonomous. These services are embedded into the business process of the enterprise that supports customer and business goals.

Oprtions Mngement Essay Example | Topics and Well Written Essays - 3000 words

Oprtions Mngement - Essay Example The contribution of n opertions strtegy is lso outlined s prt of hierrchy of strtegies tht we might find in ech firm. It gives n insight into wht is exctly n opertions strtegy nd wht re its components, how esy is it to implement such strtegy nd wht cn n orgnistion expect from it. Bsiclly, the pper discusses the question of diversity of tsks tht opertions mngement incorportes nd tht these tsks should be combined to rech the potentil of opertions executed. Opertions mngement hs its origins in the study of 'production' or 'mnufcturing mngement'. (Pine, Boynton, 2003) These terms still very much pply to mnufcturing orgnistions tht will hve distinct opertionl ctivities tht convert sy, bens nd rich tomto suce into cns of bked bens to be sold by retiler. Thus, we cn initilly think of opertions mngement s being prt of distinct function producing product nd service combintion, just s we hve mrketing nd ccounting functions in mny orgnistions. The first definition of opertions mngement is therefore: Every orgnistion tht offers goods or services hs n opertions ctivity. s fr s the orgnistion structure is concerned, some firms will hve discrete opertions function. This might be clled mnufcturing deprtment, n opertions system, or hve no identifible nme t ll. However, like mrketing nd ccounting, it is fundmentl function of the firm with professionlly trined opertions or production mngers responsible for conversion of resources into the required product nd service combintions. In some orgnistions such mngers will hve different titles, store mnger for retiler, dministrtive mngers within hospitl or distribution mngers in logistics compny. This first definition tends to be rther nrrow s it pplies to core conversion processes (mostly mnufcturing). We need therefore to widen the definition of opertions mngement to second level: The design, opertion nd improvement of the internl nd externl systems, resources nd technologies tht crete

Service Oriented Architectures Essay Example | Topics and Well Written Essays - 3000 words

Service Oriented Architectures - Essay Example â€Å"Just as the Databases were at the center of design of applications of the 70s and 80s, Components are at the center of design of the applications of the 90s and the next century† – David Vaskevitch, VP, Microsoft. Almost anyone with a sufficient amount of experience in the world of information technology would agree that the concepts of ‘Objects’ have drastically changed the way, large scale software systems are built and deployed. Objects are the basis for advanced graphical user interfaces. Their power comes from their single most useful feature of reusability. Objects are built in such a way that they can be used to build ‘components’ that can be collaborated across multi-vendor platforms. These component based architectures have modernized the way large scale enterprise level software systems are built. The large scale success of component-based architecture has lead to the development of Service Oriented Architectures (SOA). The concept of SOA is an evolution of the Component Based Architecture in which the enterprise’s architecture is developed in a ‘Service-Driven Approach’. Service driven approach means that the requirements of an infrastructure are broken down into multiple components; each component providing a distinct service and each service is autonomous. These services are embedded into the business process of the enterprise that supports customer and business goals.

Capital punishment Essay Example for Free

Capital punishment Essay Capital punishment, also dubbed the death penalty, is the pre-meditated and planned taking of a human life by a government in response to a crime committed by that legally convicted person. Passions in the US are sharply divided, and equally strong among both supporters and protesters of the death penalty. Arguing against capital punishment, Amnesty International believes that The death penalty is the ultimate denial of human rights. It is the premeditated and cold-blooded killing of a human being by the state in the name of justice. It violates the right to lifeIt is the ultimate cruel, inhuman and degrading punishment. There can never be any justification for torture or for cruel treatment. Arguing for capital punishment, the Clark County, Indiana Prosecuting Attorney writes that there are some defendants who have earned the ultimate punishment our society has to offer by committing murder with aggravating circumstances present. I believe life is sacred. It cheapens the life of an innocent murder victim to say that society has no right to keep the murderer from ever killing again. In my view, society has not only the right, but the duty to act in self defense to protect the innocent. And Catholic Cardinal McCarrick, Archbishop of Washington, writes the death penalty diminishes all of us, increases disrespect for human life, and offers the tragic illusion that we can teach that killing is wrong by killing. Death Penalty in the U.S. The death penalty has not always been practiced in the U.S. although ReligiousTolerance.org states that in the U.S., about 13,000 people have been legally executed since colonial times. The Depression era 1930s, which saw a historic peak in executions, was followed by a dramatic decrease in the 1950s and 1960s. No executions occurred in the US between 1967 to 1976. In 1972, the Supreme Court effectively nullified the death penalty, and converted the death sentences of hundreds of death row inmates to life in prison. In 1976, another Supreme Court ruling found capital punishment to be Constitutional. From 1976 through June 3, 2009, 1,167 people have been executed in the U.S. Latest Developments The vast majority of democratic countries in Europe and Latin America have abolished capital punishment over the last fifty years, but United States, most democracies in Asia, and almost all totalitarian governments retain it. Crimes that carry the death penalty vary greatly worldwide from treason and murder to theft. In militaries around the world, courts-martial have sentenced capital punishments also for cowardice, desertion, insubordination and mutiny. Per Amnesty Internationals 2008 death penalty annual report, at least 2,390 people were known to have been executed in 25 countries and at least 8,864 people were sentenced to death in 52 countries around the world: Executions in 2008, by Country †¢China 1,718 †¢Iran 346 †¢Saudi Arabia 102 †¢United States 37 †¢Pakistan 36 †¢Iraq 34 †¢Vietnam 19 †¢Afghanistan 17 †¢North Korea 15 †¢All others 66 Source Amnesty International As of October 2009, capital punishment in the US is officially sanctioned by 34 states, as well as by the federal government. Each state with legalized capital punishment has different laws regarding its methods, age limits and crimes which qualify. From 1976 through October 2009, 1,177 felons were executed in the U.S., distributed among the states as follows: Executions from 1976 Oct 2009, by State †¢Texas 442 (38%) †¢Virginia 103 †¢Oklahoma 91 †¢Florida 68 †¢Missouri 67 †¢Georgia 46 †¢Alabama 44 †¢North Carolina 43 †¢South Carolina 42 †¢Ohio 32 †¢Louisiana 27 †¢Arkansas 27 †¢All others 149 Source: Wikipedia States and U.S. territories with no current death penalty statute are Alaska, Hawaii, Iowa, Maine, Massachusetts, Michigan, Minnesota, New Jersey, New Mexico, New York, North Dakota, Rhode Island, Vermont, West Virginia, Wisconsin, District of Columbia, American Samoa, Guam, Northern Mariana Islands, Puerto Rico, and U.S. Virgin Islands. New Jersey repealed the death penalty in 2007, and New Mexico in 2009. Background The case of Stanley Tookie Williams illustrates the moral complexities of the death penalty. Mr. Williams, an author and Nobel Peace and Literature Prizes nominee who was put to death on December 13, 2005 by lethal injection by the state of California, brought capital punishment back into prominent public debate. Mr. Williams was convicted of four murders committed in 1979, and sentenced to death. Williams professed innocence of these crimes. He was also co-founder of the Crips, a deadly and powerful Los Angeles-based street gang responsible for hundreds of murders. About five years after incarceration, Mr. Williams underwent a religious conversion and, as a result, authored many books and programs to promote peace and to fight gangs and gang violence. He was nominated five times for the Nobel Peace Prize and four times for the Nobel Literature Prize. Mr. Williams was a self-admitted life of crime and violence, followed by genuine redemption and a life of uniquely and unusually good works. The circumstantial evidence against Williams left little doubt that he committed the four murders, despite last-minute claims by supporters. There also existed no doubt that Mr. Williams posed no further threat to society, and would contribute considerable good. The case of Stanley Tookie Williams forced public reflection on the purpose of the death penalty: †¢Is the purpose of the death penalty to remove from society someone who would cause more harm? †¢Is the purpose to remove from society someone who is incapable of rehabilitation? †¢Is the purpose of the death penalty to deter others from committing murder? †¢Is the purpose of the death penal

Study on the Relationship Between Stress and Illness

Study on the Relationship Between Stress and Illness Symptoms of stress can be evident in different ways including physically, emotionally or mentally. This is dependent on what is causing the stress to occur. Physical A stressful situation can cause the body to display various symptoms including tension headaches, inability to sleep, raised blood pressure, problems with the digestive system, nervousness, alopecia, and strokes. A cause of physical stress could be a car accident or starvation such as that associated with eating disorders. Emotional Stress which affects the mind can cause emotional responses such as anxiety, depression and irritability, inability to cope with day to day situations, memory loss and an inability to concentrate. Emotional stress could be caused by a bereavement. Mental A person who experiences long term stress may develop psychological problems. This can manifest as social isolation, phobias, compulsive behaviours and eating disorders such as over eating for comfort. Mental stress can be caused by the person having a bad day at work. Stressors, the cause of stress, can be described as situations that are experienced as a perceived threat to ones wellbeing or position in life, when the challenge of dealing with which, exceeds the persons perceived available resources. When a person experiences stressors the body responds with fight or flight. This reaction triggers the release of adrenaline and cortisol which increase the heart rate and decrease the digestion rate. The bodys blood supply is diverted to the large muscles providing a burst of energy and strength. The reaction lasts for the duration of the perceived danger and the body returns to normal. The reaction may not completely diminish in someone experiencing chronic stress which can lead to long term health problems. The general adaptation syndrome (GAS) was described by Hans De Selye during the 1920s. It is the short and long term reaction of the body to stress and is a three stage process. The first stage of GAS is called the alarm reaction. During this stage the fight or flight response is activated within the body as an immediate reaction to the stressful situation. This response can lead to the person being susceptible to illness due to their immune system being suppressed. The second stage of GAS is called adaptation. Continued stress causes the body to adapt to the cause of stress to reduce the effects on the body. This could be the situation for someone with an eating disorder whose body adapts to absorb the maximum nutrients from the food eaten or to conserve energy. The third stage of GAS is called exhaustion where the body has been exposed to a stressor for a prolonged period of time and is no longer able to deal with the stress. The result in the body could be severe limitation in the ability of the immune system to fight disease and the person may experience cardiac arrest. The general adaptation syndrome identifies three stages of reaction to stressful situations an individual may experience. This theory identifies that the more prolonged the exposure to stress is the more severe the reaction is in terms of their health. A strength of GAS is that if an individual is aware of the processes involved they will be able to seek help before their symptoms become life threatening. This would rely on the person being able to identify that intervention is needed at the earliest opportunity. A limitation of the theory is that whilst identifying the stages a person may experience it does not offer any solutions to alleviate the stress. Friedman and Rosenman (1974) identified two types of personality relating to how individuals respond to stress. Type A personalities were identified as being impatient, competitive, ambitious, aggressive they may also experience difficulty in relaxing. A person with Type B personality was identified as being less driven, more easy-going, patient and able to relax. Friedman and Rosenman carried out research over 8 years monitoring the health and lifestyle of 3500 healthy men. The study concluded that a person with Type A personality had a significantly increased risk of developing coronary heart disease. This study showed that the population can be divided into two distinct groups of personality traits. A persons reaction to stress is according to this study directly related to the personality type the person has. This theory is limited by the need to know the personality type a person is in order to identify if they are at an increased risk of developing health concerns related to stress. An advantage of this theory is that by being aware of the personality type strategies can be put into place to prevent stress from causing health problems. Brady (1958) conducted a behavioural stress study on monkeys. The monkeys were paired and strapped into chairs before being given electric shocks every 20 seconds. Each monkey had levers and lights which warned them of the imminent shock. One monkey the executive was able to use a lever to prevent the shock from being administered. The other monkey yoked was not able to control the shock. The executive monkey experienced stress in having to press the lever at the correct time. Brady found that over a period of time the executive monkeys developed gastric ulcers and may have died however the yoked monkeys did not develop ulcers as they did not experience the same level of stress due to their behaviour not influencing the administration of the shock. This study was conducted on monkeys not humans who may have reacted differently to the stressor the executive monkeys were exposed to. The response in humans might not have been so severe in that they may not have died. The study was not concerned with the welfare of the monkeys used. The limitation of this study is that by conducting it on monkeys it is not necessarily accurate to relate the results to human stress as the results could have been different. An advantage of this study could be that forced behaviour has been identified as a cause of stress which can cause health issues. Marmot et al (1997) conducted research into a cognitive approach to stress. The aim of the study was to establish if a lack of control in the workplace caused an increase in the occurrence of stress related illness. The research was conducted over a period of three years using over 10,000 civil servants. Self report questionnaires were completed to assess the level of job control the participants had. There were also assessments carried out by personnel managers. The researchers then compared the results to incidence of stress related illness. The study found that workers with less work control were at a significant increased risk of dying from a heart attack than those with more control. The workers with less control were also found to be more likely to have other stress related illnesses. A limitation of this research into a cognitive approach to stress is that the study focussed on one specific group of workers whilst the results indicated that stress related illness increased among those with the least control in the work environment the study does not identify if this is true for the entire population. An advantage is that the study could be applied and repeated in other workplaces to identify if there is a lack of control felt by employees. This would allow employers to increase the level of control with the aim of preventing stress related illnesses. In conclusion it is possible that all areas discussed show how stress can affect us and can cause illness as a result. Stress caused through a combination of cognitive and behavioural factors creates physiological symptoms which in turn have a harmful effect on our body. The human body is able to adapt to a certain level of stress however if the stress continues long term it can have a disastrous effect on the body.

Ecodisc :: essays research papers

Ecodisc Ecodisc is a program which allows the user to take on the role of a Nature Reserve Manager. It was designed by a man named Peter Bratt, and Englishman in South Devon. Ecodisc is designed so that the user can see what effects certain changes can make on the environment with out actually making the changes. Ecodisc is a good educational tool showing new users the effects of certain decisions. It can also be used a map, because it lets you see various parts of the nature reserve without actually going there. Ecodisc allows the user to take on the role of a nature reserve manger, which is the person who basically decides what changes will be made to the nature reserve. With aid of the Ecodisc, the results of decisions can be shown without actually doing anything, or doing any harm to the environment. Ecodisc allows users to explore various parts of the nature reserve and view it from different positions. You can see the area from any direction (north, south, east or west), and even from a helicopter position. Ecodisc lets you see the areas of the reserve from any part of the year. For example, you could view the reserve in the middle of winter and see what it looks like in summer. Ecodisc is one of the first interactive programmes, and there are hopes of some day there being interactive broadcast television. This is a breakthrough in visual entertainment, because while television lets you see a place, interactive video will let you explore it. Interactive video is where the viewer decides the plot and characters of a movie, or show. The viewer will basically be able to write their own scripts and produce the movie at the same time. Ecodisc would be very good for showing students (or anyone) interested in managing nature reserves, working for national parks or just as an interest

Business Credit Evaluation :: GCSE Business Marketing Coursework

Business Credit Evaluation Credit Review Summary What Banks Look For The most fundamental characteristics a prospective lender will want to examine are: - credit history of the borrower - cash flow history and projections for the business - collateral that is available to secure the loan - character of the borrower - loan documentation that includes business and personal financial statements, income tax returns, and frequently a business plan, and that essentially sums up and provides evidence for the first four items listed The first three of these criteria are largely objective data (although interpretation of the numbers can be subjective). The fourth item, the borrower's character, allows the lender to make a more subjective assessment of the business's market appeal and the business savvy of its operators. In assessing whether to finance a small business, lenders are often willing to consider individual factors that represent strengths or weaknesses for a loan. Also consider our discussion of how banks judge your application. Loan Application, Bank Review Form: What Do Banks Really Look For? Financial Statement: Last 3 years of business financial statements and/or tax returns Last 3 years of owner ¡Ã‚ ¦s personal tax return Current personal financial statement Cash Flow from Operations "Why is there so much month left at the end of the money?"  ¡X Unknown The cash flow from your business's operations  ¡X the cycle of cash flow, from the purchase of inventory through the collection of accounts receivable  ¡X is the most important factor for obtaining short-term debt financing. A lender's primary concern is whether your daily operations will generate enough cash to repay the loan. In addition, cash flow shows how your major cash expenditures relate to your major cash sources. This information may give a lender insight into your business's market demand, management competence, business cycles, and any significant changes in the business over time. While a variety of factors may affect cash flow and a particular lender's evaluation of your business's cash flow numbers, a small community bank might consider an acceptable working cash flow ratio  ¡X the amount of available cash at any one time in relationship to debt payments  ¡X to be at least 1.15:1. As most lenders are aware, cash flow also presents the most troubling problem for small businesses, and they will typically require both historic and projected cash flow statements. Managing Your Cash Flow A healthy cash flow is an essential part of any successful business.

The Yankee Stadium’s History

Any discussion of the history of New York City without a history of the New York Yankees would be like describing Pavarotti without mentioning his voice. And any discussion of the Yankees without including Yankee Stadium would be farcical. And when you get right down to the nitty-gritty of historical realities encompassing the Yankees and Yankee Stadium you have to include Babe Ruth. The Babe, the â€Å"Bambino,† the â€Å"Sultan of Swat,† was the reason the Yankees built Yankee Stadium, and that is why they call it â€Å"The House That Ruth Built.† The Yankees are beyond any reasonable doubt the premier team in Major League Baseball. They have been in the World Series 39 times since the American League was fashioned in 1900 – and they have won 26 of them. The teams tied for second most World Series Championships are the Cardinals and Athletics with 9. The Yankees have been in New York since 1903; previously they were in Baltimore known as the Baltimore Orioles. They started out in New York as the Highlanders, playing at Hilltop Park (today, the Columbia-Presbyterian Medical Center sits where Hilltop Park was located). They played in the Polo Grounds (sharing it with its home team, the National League New York Giants) from 1913 to 1920. The Yankees became popularly known as the â€Å"Yankees† around 1904; and when the New York Herald reported on April 15, 1906, â€Å"Yankees win opening game from Boston, 2-1,† it was more or less official they were no longer the Highlanders. Meanwhile, tracing the origins of Yankee Stadium properly includes a brief recounting of how Babe Ruth got to the Yankees; he was the spark that lit the fire that put Yankee Stadium in the Bronx. By 1919, a strong rivalry had existed between the Boston Red Sox and the Yankees for several years. A young Boston pitcher who was also an unbelievable slugger, Babe Ruth, hammered the Yankees on many occasions, including Opening Day at the Polo Grounds on April 23, 1919. According to The New York Times (4/24/1919), â€Å"Babe Ruth won the game for the Red Sox in the first inning when, with Jack Berry on first base, he slammed out a lucky home run†¦Ã¢â‚¬  Final score, Red Sox 10, Yanks 0. There had been some doubt as to whether the phenomenal Ruth would even play for Boston in 1919; Ruth had been a hold-out in the spring, following a sensational season as a pitcher and slugger, and a magnificent World Series for Boston in 1918, in which he won two games (hurling 13 scoreless innings in one game) and gave Boston power at the plate. It was to be Boston's last World Series victory until 2004. In the spring of 1919, Ruth was holding out for $15,000 a year, according to a New York Times story (3/19/1919): â€Å"Ruth†¦wants $15,000 for one year or will sign a contract calling for $10,000 a year for three years.† The headline in The New York Times on December 27, 1919 read, â€Å"Ruth Talks Of Retiring†; the story said Ruth is â€Å"‘through with major league baseball' unless the management of the Boston American league Club is prepared to meet his demand for $20,000 a year.† The New York Times reported on March 22, 1919, that â€Å"Babe Ruth Finally Signs with Boston,† for a reported $27,000 for three years. Boston owner Harry H. Frazee's previous best offer had been $8,500, the Times reported. Contrasted with today's dollar value $27,000 would be worth around $540,000; and even though $27,000 doesn't sound like much compared to the $2.5 million original cost of building Yankee Stadium – or to the salaries today's players draw. (To wit, Derek Jeter's 2003 salary was around $15,000,000; he came to the plate 482 times; do the math and see Jeter earned around $30,000 per at-bat). But to the average New Yorker in 1920, Ruth's salary was a huge quantity of money. Hundreds of thousands of American boys were fighting in Europe in WWI (thousands of them dying), and 650,000 Americans had died recently due the influenza epidemic. Times were rough, to say the least. Meantime, after Ruth clubbed 29 homers in 1919, an October 12th Times article hailed him as the â€Å"mastodonic mauler†; New York obviously was in awe of this superstar. And then, to the great surprise of Gotham, the one of the biggest sports events of the century hit the headlines of The New York Times with the clout of a Ruthian grand slam (1/6/1920): â€Å"Ruth Bought by New York Americans For $125,000, Highest Price in Baseball Annals.† The story reported that Ruth's acquisition gave the Yankees â€Å"the hard-hitting outfielder long desired.† After coming to terms with the Yankees, for $40,000 on a two-year deal, the Yankee owner Colonel Jacob Ruppert soon took out a $150,000 insurance policy on the Babe, unprecedented at that time. And interestingly exactly one year to the day after the Times story hailing Ruth's arrival in New York, the Times headline (2/6/1921) rang: â€Å"Yankees To Build Stadium In Bronx.† In the article, Yankee owners Colonels Jacob Ruppert and Tillinghast L. Huston announced they had purchased 10 acres â€Å"on the east bank of the Harlem River,† between 157th and 101st Streets, from the estate of the late William Waldorf Astor. â€Å"On this terrain there will be erected a huge stadium, which will surpass in seating capacity any structure hitherto built for the accommodation of lovers of baseball,† the Times' article continued, in typical dramatic style, albeit there was no byline so the author was unknown. Excavation was to begin â€Å"in a few weeks and building will be expedited by every means known to human effort,† the article explained. The Yankees did not announce what they paid for the ten acres, but the Times had it â€Å"on good authority† the tab was $500,000, and the estimated cost of the projected stadium was $2 million. The â€Å"running time from Forth-second Street by subway is only about 16 minutes,† the story continued, and by â€Å"elevated train it will take about 2 minutes more to reach the Yankee's stadium than is necessary to get to the Polo Grounds.† The process of street-closings â€Å"will offer no obstacles,† the Times explained; and the stadium was projected to be â€Å"triple-decked,† which was made necessary â€Å"by the expectation of even greater patronage than that of the last season.† The obvious reference was to the fact that Babe Ruth is not only the greatest home run hitter in the game, but he was the biggest box office draw in all entertainment venues at that time. Prior to the decision to build the stadium on its present site, the Times (2/6/1921) reported that â€Å"until a few days† prior to February 5, 1921, Yankee owners â€Å"were inclined to favor the site of the Hebrew Orphan Asylum, between 136th and 138th streets, near Broadway.† The stadium was to hold 75,000 fans eventually, though at first it would only hold 50,000 (5,000 of them bleacher benches); yet â€Å"when the cost of building materials becomes more nearly normal,† the Times explained, the capacity will be increased to the higher figure. This â€Å"massive and most attractive structure has been designed to adorn the new playing field of Babe Ruth and his pals,† the story went on. â€Å"Concrete and steel of the finest quality available will be used†¦Ã¢â‚¬  Before any building could begin, and before contractors were to be hired to do the building, the approval from City Hall had to be obtained. And while New York City Mayor John F. Hylan first hedged on the decision for the city to â€Å"release its interest in the bed of Cromwell Avenue† in the Bronx, which ran directly through the site, he eventually signed off on the deal. However, the sub-headline on March 18, 1923, in the Times badgered the mayor a bit by shouting that â€Å"Mayor Hylan Holds Up Decision on closing of Street Running Through Site.† â€Å"I am not going to put my signature on the official document,† the mayor said in the Times, â€Å"until I find out whether everything is regular.† The â€Å"Sinking Fund Commission† had already signed off on the street's demolishment, and worried that the mayor's delay â€Å"might prevent the Yankees from playing in their new stadium in 1923,† the article indicated. Meantime, within a couple weeks, the mayor did sign off on the closing of two streets, which â€Å"came as a personal triumph for colonel Jacob Ruppert, President of the Yankees, who had labored for more than a year to obtain the necessary permission for the closing of the streets,† the Times reported in late March, 1922. [Note: the dates on the New York Times' archival documents do not always reflect the precise date of publication.] Not only did New York political bureaucracies have to be hurdled by Ruppert, the Astor family lived in England, and since it was their property that was the site used for the stadium, their consent was imperative. After official approval, the Times' headline â€Å"Yankees Call For Bids on Stadium† had a little editorial slant in the sub-headline, â€Å"If Contractor Are Rational In Prices Work Will Begin at Earliest Possible Date.† The date on this article can't be correct (it is 1/4/1922), so it must have been in late February. â€Å"Excavation, grading, masonry, sewers and downspouts, reinforced concrete, lathing and plastering, ornamental metal work, tile work, terrazzo floors, carpentry, toilets, roofing, sheet metal, steel sash, painting and wood bleachers† all went out to bid, the Times reported. And it did seem like there was a limited amount of capital available for the huge project, because the newspaper article mentioned that bids â€Å"for the steel work have already been obtained,† and â€Å"they were fairly satisfactory†¦ranging from much below the prices of a year or two ago, but rather higher than had been hoped by the men who have to put up the money for this project.† The colonel did not plan to â€Å"get what they considered the worst of it financially† in case the bids â€Å"proved to be beyond the bounds of reason,† the story explained. Ground was to be broken around the first of March. The White Construction Company of 95 Madison Avenue was selected as contractor of the stadium, the Times reported shortly after receiving city permission to go ahead. Work was to begin â€Å"on what will be the greatest baseball plant in the world† within a week, and the Osborn Engineering Company of Cleveland was chosen as overseer of general construction; the stadium was projected to be completed by September first, at that time. The number of seats available for fans, which had changed several times, in this article (â€Å"Yanks Pick Firm To Build Stadium†) it was listed at 60,000. A â€Å"double shift of workmen† will be employed, and the Osborn company predicted in the Times that â€Å"it will smash all records in the matter of speed.† The actual construction of the stadium of course received a great deal of coverage in The New York Times. One story (4/1/1923) – headlined, â€Å"Yanks' Stadium Big Engineering Task,† pointed to the massive construction effort being put forth, in order to meet an incredibly tight deadline, and listed the materials that would go into the stadium. To wit: Thirty-thousand yards of concrete (from 45,000 barrels of cement, 30,000 yards of gravel and 15,000 yards of sand); 2,500 tons of structural steel and 1,000 tons of reinforced steel; 2 million board feet of lumber for bleachers and forms; 600,000 â€Å"linear feet† of lumber for the grandstand seats; 4 miles of pipe for railings in box seats, reserved seats and bleachers; 500 tons of iron for stadium seats; and about 500 workmen were brought in to put it all together. In a story in the archival Times dated May 4, the cost of the stadium changed again, this time to $3 million, and the attendance capacity became 85,000. But all the inconsistencies notwithstanding, the Times' story with the most pizzazz of all the archival coverage of Yankee Stadium was published April 19, 1923: â€Å"74,200 See Yankees Open New Stadium; Ruth Hits Home Run.† While 25,000 were turned away from the sold-out house, those in attendance were treated to this: â€Å"In the third inning, with two teammates on the base lines, Babe Ruth smashed a savage home run into the right field bleachers.† This shot by Ruth was made all the more dramatic because he had been quoted as saying he would give â€Å"a year of my life† to smack a round-tripper on opening day in the new stadium. The 74,200 attendance figure that was reported by the stadium was, Times' readers learned on the 20th, â€Å"merely an estimate† by Yankees business manager Edward Barrow. In fact, only around 52,000 paid to see the game, plus several thousand were admitted with passes. But the Times – obviously feeling somewhat duped – reported that the 74,200 figures â€Å"were accepted without question and were published in hundreds of newspapers in this country and in various places around the world.† In addition to baseball, many sporting events have taken place in Yankee Stadium over the years, including: boxing matches with stars like Jack Dempsey (Muhammad Ali defeated Ken Norton on July 24, 1923); indeed over 30 championship fights have taken place at the stadium, according to the Yankees' Web site; NFL games with the New York football Giants between 1956 and 1973; Army-Navy football games, religious conventions (including two visits by Popes). Lights were installed at the stadium in 1946, and in the winter of 1966-67, the stadium got a $1.5 million update, consisting mostly of fresh paint. Starting in 1973, the stadium was torn down almost totally, and rebuilt; during that period, the Yankees moved to Shea Stadium for two seasons. The stadium has been the playground for American sporting icons like Joe DiMaggio, Lou Gehrig, Mickey Mantle, Roger Maris, Reggie Jackson, and many more.